How to Fix A Samsung Washing Machine Making Noise During the Spin Cycle?

Wiki Article

When your Samsung washer starts groaning, rattling, or banging loudly during the spin cycle, it's easy to worry it's broken for good. Fortunately, the cause is often simple and fixable with basic troubleshooting. This guide will help you identify the source of the noise and walk you through the most common fixes.

 ### ???? Identify the Noise

Before you start, it helps to determine what the noise sounds like. This will point you directly to the most likely culprit and solution.

*   **Thumping or Banging:** Often accompanied by shaking, this usually means an **unbalanced load or improper installation**.

*   **Rattling or Clicking:** This rapid, clattering sound is often caused by **loose items in the drum** or the machine vibrating against something.

*   **Squealing or Squeaking:** A high-pitched noise like a squeaky wheel can indicate **overloading** or, on older machines, a worn-out drive belt.

*   **Grinding:** This harsh sound typically happens when metal rubs against metal, pointing to **failing drum bearings**.

*   **Grating or Low Humming:** If you only hear this when the machine is draining, the issue is likely a **clogged drain pump filter*

### ????️ Basic Checks & Quick Fixes

Before any disassembly, start with these simple checks. They resolve the majority of household washer noise complaints.

**1. Ensure the Washer is Dead Level** ????

An uneven washer can't spin properly, leading to loud vibrations. Use a spirit level to check side-to-side and front-to-back. Adjust the four levelling feet up or down until the washer is perfectly stable on the floor. If it's on a slippery or soft surface like a carpet or tile, place a sturdy plywood board underneath it to create a solid base.

**2. Check the Load for Balance** ⚖️

This is the most common cause of a banging spin cycle. A single heavy item (like a rug or weighted blanket) or a very small and uneven load can send your washer into a violent shimmy. For a quieter spin, pause the cycle, open the door, and redistribute the laundry. Make sure heavier items are mixed with lighter ones so the weight is evenly distributed around the drum.

**3. Verify Shipping Bolts are Removed** ????

If your washer is new and you've never used it before, the most likely problem is still having the shipping bolts in place. These bolts lock the drum to prevent damage during delivery and **must be removed before the first use**. Check the back of the machine and use the included spanner to remove them.

**4. Run a Calibration Cycle** ????

Calibration tells your washer's computer how to accurately gauge a load's weight, which is crucial for a smooth spin. Run this mode with the drum empty. To start, press and hold the **Temp** and **Delay End** buttons for about 3 seconds until "CB" appears on the screen, then press **Start/Pause** to begin.

**5. Check for Foreign Objects & Door Seals** ????

Small items like coins, buttons, bobby pins, or bra wires can fall out of pockets and get trapped between the inner and outer drum, creating loud rattling noises as the drum spins. You should also inspect the rubber door seal for any tears or damage that could rub against the drum as it turns.

### ???? Tackling Drainage & Internal Blockages

If you hear a humming, grating, or rattling noise, especially when the washer is draining, the problem is often in the drain pump.

**6. Clean the Pump Filter** ????

Samsung washers have a pump filter that catches lint and small debris. If it becomes clogged, the pump has to work harder, which can cause a grating noise during the spin cycle. Locate the small access panel at the front of the washer, place a towel to catch water, open the filter, and clean it out thoroughly.

**7. Inspect the Pump for Blockages** ????

If cleaning the filter didn't silence the hum, a larger object (like a sock or child's sock) may have gotten past the filter and is jamming the pump impeller. This requires accessing the drain pump from the front or bottom to visually inspect and remove any obstacles. If the pump is clear but still noisy, it may need to be replace

### ???? Advanced DIY: Shock Absorbers, Springs & Belt

If the washer is shaking violently, jumping around, and the basics haven't helped, the culprit is likely the suspension system.

**8. Test and Replace the Shock Absorbers** ????

Front-load washers use shock absorbers (similar to those in a car) to dampen the drum's movement. Over time, they can weaken or break, allowing the drum to violently bang against the machine's chassis. To test them, push down hard on the drum from the inside. If it bounces up and down more than once, your shocks are worn and need replacing. You can order new ones online and replace them as a set.

**9. Inspect the Springs and Drive Belt** ????

The drum is also held in place by suspension springs at the top. If a spring is broken or stretched, it too can cause imbalance. While the machine is apart, check the drive belt that connects the motor to the drum. Listen for **squealing or chirping** as the belt may be loose or glazed. While this is a more involved DIY job, it's still manageable with online tutorialls

### ⚙️ Complex Issues Needing a Professional

Some jobs require a high level of technical skill or specialized tools. These problems are best handled by a qualified repair technician.

*   **Worn Drum Bearings:** If you hear a loud, continuous **grinding or roaring noise** that changes with the drum's rotation, the bearings are likely shot. Replacing them is a major repair that involves completely disassembling the washer to separate the inner and outer tubs.

*   **Stator or Rotor Issues:** These are the parts that make the drum rotate. A malfunction here can cause anything from a harsh grinding to a complete failure to spin.

*   **Main Control Board Failure:** While rare, a faulty control board can send erratic signals, causing the motor to behave strangely and make unusual noises.

### ???? Troubleshooting at a Glance

Here’s a quick reference table to help you diagnose the likely cause based on the noise type and recommended action.

| Noise Type | Likely Cause | Solution |

| :--- | :--- | :--- |

| **Banging / Thumping** | Unbalanced load, un-level machine, worn shock absorbers | Redistribute clothes, level feet, check and replace shocks |

| **Rattling / Clicking** | Foreign objects in drum, items against machine | Check pockets, check for loose items in drum, ensure washer has clearance |

| **Grinding** | Worn drum bearings, failing rotor/stator | Request professional repair service |

| **Squealing / Squeaking** | Overloading, loose/damaged drive belt | Reduce load size, inspect and replace drive belt |

| **Grating / Humming** | Clogged pump filter, blocked drain pump | Clean the pump filter, inspect and clear drain pump |

By listening carefully and working through these steps, you can often resolve a noisy spin cycle on your own. For persistent or complex mechanical issues, don't hesitate to call in a professional.